Instruction Manual

Remote Management System
15
[System->Identification] Assign the system’s name, contact, and location.
Items Definition
Name The name used to identify the UPS.
Contact The person to be contacted for issues..
Location The location of the UPS.
[System->Security] Sets for security.
Items Definition
Timeout
The period (in minutes) that the system waits before
auto-logging off
[System->Event Action] Displays the event actions for each event. You can set the event
actions to execute when the specific event occurs. The following events actions can be setup.
- Log : Record the event if the “Event Logs”
- E-mail : Sent an email to specific user.(An available SMTP server is necessary)
- Trap : A SNMP trap sent to a specific IP address.
[System->SMTP Server] After setting the proper SMTP server, the UPS can send an email to
users when specific event occurs.
Items Definition
Server's IP/Host Name The name of the UPS used for identification.
Sender's E-mail Address The person to contact when an email is sent.
Authentication
Select this option if the SMTP server needs
Authentication check.
Username Username used for Authentication.
Password Password used for Authentication.
[System->E-mail Recipients] Set up to five e-mail recipients in designated email address
format. The Recipients will receive an e-mail notification when events occur.
[System->Trap Receivers] Set up to ten trap receivers in the IP format. The receiver will receive
a SNMP trap when an event occurs. When the PowerPanel Business Edition Client connects to
the UPS, the IP address of the PowerPanel Business Edition Client will be automatically added
to the list of Trap Receivers.