User Manual

ECA-70MIXAMP-1-120 Installation Manual
pg. 6
Front Panel
1 2
5 7 8 9
3 4
6
1. Source Selection Buttons
Direct Selection of sources.
2. Source LEDs
Indicates active signal from appropriate source.
3. Output Level Meter
Master volume output level.
4. Power LED
BLUE – Amplier is On
RED – Amplier is in Protection
5. Microphone Gain Controls
Independent gain for the appropriate microphone.
6. Source Gain Control
Gain for all sources connected to the amplier.
7. Bass / Treble Adjustments
Adjusts the tone for the amplier output.
8. Master Volume Control
Controls the output for the amp from all sources and microphones.
9. Power Switch