Manualshelf

User guide

ManualsBrandsStaub Electronics ManualsAccessories for videoB-500-RX-230-IR BINARY - HD BASE T RECEIVER WITH BI-DIRECTIONAL IR FOR B-500 HDBASET MATRIX SWITCHERS
12345678910
pg.7
www.snapav.com Support: 866.838.5052
B-500-RX-230-IR Installation Manual
5.2. HDMI Cable
• Use Binary (or similar) 2 meter or shorter, High Speed rated HDMI cables between any device and
the HDMI output port of the Receiver for the best performance.
• The Receiver should work with a longer cable, but in the case of any picture or sync issues, it
should be 2 meters or less between the equipment and the Receiver to accurately troubleshoot.
• Avoid using HDMI keystones. The best practice for HDMI cables is to have one unbroken cable
between the Receiver and other equipment.
6. Power Supply
The B-500-RX-230-IR uses a 5V DC 2A power supply.
Power Supply Voltage Warning! Before applying power to the Receiver, read the label on the power
supply to conrm that it is 5V DC 2A. Connecting the wrong voltage power supply may cause damage to
the Receiver or the supply.