User guide

B-500-MTRX-230-8x8 Installation Manual

Pg. 23

www.snapav.com Support: 866.838.5052

11.1.4. Resetting to Factory Defaults

ThisprocedureresetstheB-500-HDMATRIXtofactorydefaults:

• EDIDs-1080pStereo(embeddedEDID2)

• I/O-AllOutputssettoInput1

• 1CATEDIDscleared,DHCP-Enabled.

Reset Factory Defaults

Display Readout

(Example)

1.PressDEFAULT

E-

2.PressDEFAULT

3.PressDEFAULT

4.PressDEFAULT

5.PressENTER

D-

Note: Resetting factory defaults can take up to 2 minutes to complete. Wait until the screen displays an output and input

selection of 1.1 before attempting further setup or use.