User guide

B-500-MTRX-230-8x8 Installation Manual
Pg. 21
www.snapav.com Support: 866.838.5052
11. Operation and Control
Duringsetupandtesting,usetheincludedIRremotetocontrolthematrixswitcher.Aftersetupiscomplete,acontrol
methodshouldhavebeensetupandprogrammedasdescribedinSection7.7.MatrixControlConnectionsforregular
operation.
11.1. IR Remote
11.1.1. Route Inputs to Outputs
Thissectiondescribesthecorrectbutton-pushsequencestoperformregularoperationswiththeIRremote.
The ENTER key must be pressed within 10 seconds of the last command in order to be processed.
POWER
1
ON OFF
2 3
OUTPUT
INPUT
OUTPUT
OFF
STATUS LEARN DEFAULT CLEAR
ALL
4 5 6
7 8
10+
ENTER
9
1 2
3
45 6
7
8
9
10 11 12 13
Key Function
1 ON Poweronthematrixswitcher
2 OFF Enterstandbymode
3
NumberKeys
1-9
Selectanumber
4 10+ NotUsed
5 ALL SelectallInputsorOutputs
6 ENTER* Entertotriggertheprevioussetting
7 OUTPUT Beginoutputselection
8 INPUT Begininputselection
9 OUTPUTOFF Turnoff/MutetheselectedOutput
10 STATUS PresentEDIDorOutputstatus
11 LEARN LearnEDIDfromoneoutput
12 DEFAULT BeginEmbeddedEDIDSelection
13 CLEAR
CleartheformerIRoperationprocedurewhichuser
justpressedbuthasnotyetappliedbypressing
ENTER
Input to Single Output
Example:Output=3Input=4
Display Readout (Example)
1.PressOUTPUT
--
2.PressNumberKey(1-8)toselectOutput
3-
3.PressINPUT
3-
4.PressNumberKey(1-8)toselectInput
34
5.PressENTER
34