Manual

B-500-MTRX-230 Installation Manual
Pg. 20
© 2013 Binary
™
8.4.2. How to Set Embedded EDID for a Single Input
8.5.1. How to Learn EDID to a Single Input
8.4.3. How to Set Embedded EDID for All Inputs
Example: Input =1 Embedded EDID=4 Display Readout (Example)
1. PressDEFAULT
 
2. PressNumberKey(1-8)toselectoneEmbeddedEDID
0 ..
3.PressINPUT
0 ..
4. PressNumberKey/stoselecttheInputtowhichtheEDIDis
applied
0 . 0.
5. PressENTER
 
(success)
FF FF
(fail)
Example: Input =1 Embedded EDID=4 Display Readout (Example)
1. PressDEFAULT
 
2. PressALLtoselectallInputs
 
3.PressNumberKey(1-8)toselectEmbeddedEDID
0 ..
4. PressENTER
 
(success)
FF FF
(fail)
8.5. EDID Learning
FormoreadvancedEDIDconguration,learningcanbeusedtoassignEDIDsdirectlyfromdisplaystooneormore
inputs.Thisisusefulwhenthesystemcontainsadisplaythatcannotacceptthehighestresolutionavailablefrom
sources,butallsourcesneedtobeavailabletoalldisplays.
Note: EDIDs can be learned from displays connected via the HDBaseT or the HDMI output.
When to Use Learned EDIDs
• AnolderdisplaydoesnotworkproperlywithanyoftheembeddedEDIDs.
• WhenthesourceisaPCitmaybenecessarytousealearnedEDID.
• LearningEDIDtoasingleinput
Example: Input =1 EDID Learned from Output 4 Display Readout (Example)
1.PressLEARNONCEtoreadHDMIport,orTWICEforHDBaseT
port.
L._. 
2.PressOUTPUT
L._. 
3.PressNumberKey/stoselecttheOutputtheEDIDislearned
from.Use10+toselectOutputsthrough10-16
0 ..
4.PressINPUT
0 ..
5.PressNumberKey/stoselecttheInputtheEDIDisapplied.Use
10+toselectOutputsthrough10-16
0. . 0. .
6.PressENTER
 
(success)
FF FF
(fail)