Manual

B-500-MTRX-230 Installation Manual
Pg. 15
www.snapav.com Support: 866.838.5052
7.9. B-500-RX-230-IR IR Connections
TheB-500-RX-230-IRIRportsaredescribedbelow.Usethediagramforreference.
7.9.1. IR Receiver
AttachanIRreceivertothisporttocaptureIRcommandsintheroomforpassthroughtosources.Thisportwillalso
sendcommandsbacktothematrixswitcherforcontrolofsourceselectionineachzone.
7.9.2. IR Flasher
AttachanIRashertothisportforcontrollingadisplayorotherequipmentwithcommandssentfromacontrolsystem
asheroutput,intothematrixswitcherIRINPUTTOROOMportsandthentothisport.
1 2
IR Signal (Tip)
GND (Ring)
12V DC (Sleeve)
IR Signal Tip
GND (Ground) Ring
+12V DC Sleeve
IR Signal (Tip)
GND (Sleeve)
IR Signal Tip
GND (Ground) Ring
7.9.3. Yellow Tag IR Adapter
TheyellowtaggedadapterincludedwiththeB-500-RX-230-IR(illustratedbelow)isusedtopluga3.5mmmonomini
cableintotheIRReceiverportoftheB-500-RX-230-IR.ThisisusedtosendIRcommandstothematrixswitcherfrom
otherasheroutputsinsteadofanIRReceiver.
IR Signal (Tip)
GND (Ring)
12V DC (Sleeve)
IR Signal (Tip)
GND (Sleeve)
To IR Control System
or
Connecting Block
To B-500-MTRX