Installation Manual B-500-MTRX-230-8x16 Binary™ HDMI Matrix Switcher with HDMI and HDBaseT Outputs B-500-MTRX-230-16x16
B-500-MTRX-230 Installation Manual 1. Important Safety Instructions Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 1. Read and follow all instructions and warnings in this manual. Keep for future reference. 2. Do not use this apparatus near water. 3. Clean only with a dry cloth. 4. Do not block any ventilation openings.
B-500-MTRX-230 Installation Manual Table of Contents 1. 2. 3. 4. 5. 6. Important Safety Instructions Product Overview Package Contents Features Recommended for Installation Device Layout 6.1. Front Panel 6.2. Rear Panel 7. Installation and Setup 7.1. Basic Installation Diagram 7.2. Basic Instructions 7.3. Installation Tips 7.4. Switcher Location and Placement 7.4.1. Rack Installation 7.5. HDMI Input Connections 7.6. Output Connections 7.6.1. Choosing the Correct Output 7.6.2. HDMI Outputs 7.6.3.
B-500-MTRX-230 Installation Manual 2. Product Overview Welcome to Binary™, one of the most highly regarded brands available today. This product is engineered to provide years of exceptional reliability. We appreciate your business and we stand committed to providing our customers with the highest degree of quality and service in the industry. The B-500-MTRX-230-8X16/16X16 is a state-of-the-art HDMI matrix switcher with both HDMI and HDBaseT Outputs. It provides true matrix routing for HDMI signals.
B-500-MTRX-230 Installation Manual 6. Device Layout 6.1. Front Panel 1 2 3 4 5 B-500-MTRX-230-16x16 1. Power On/Off Switch Toggle Power from On to Stand-by. Can be disabled from Configuration Utility software. 2. Source Status LEDs Indicates that the selected source is on and transmitting an HDMI signal. 3. Output Display Displays the last output selected. 4. IR Receiver Window IR receiver for Matrix to capture commands sent by IR remote. 5. Input Display Displays the last input selected. Pg.
B-500-MTRX-230 Installation Manual 6.2. Rear Panel 1 2 3 4 5 15 13 11 9 7 5 3 1 16 14 12 10 8 6 4 2 LINK LINK LINK LINK 6 OUTPUTS 7 8 9 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 IR OUTPUT TO SOURCE LINK LINK LINK IR INPUT TO ROOM LINK ON IR INPUT TO ROOM IR OUTPUT TO SOURCE 12V DC 11.2A INPUT LINK LINK LINK LINK LINK LINK LINK LINK 12V DC 11.2A INPUT 10 11 12 13 14 10 1.
B-500-MTRX-230 Installation Manual 7. Installation and Setup 7.1. Basic Installation Diagram Complete the basic installation section to set up the matrix switcher for media distribution before completing any other setup. Use this diagram for reference during basic installation of the matrix switcher, sources, displays and wiring.
B-500-MTRX-230 Installation Manual 7.2. Basic Instructions These are the basic steps that must be taken to connect equipment to the inputs and outputs of the matrix switcher and configure the system for use. See the sections listed for full information on completing each step. 1. Unpack the matrix and install it near the source equipment. (7.4. Switcher Location and Placement, page 10) Note: Do not provide power to the matrix switcher until step 8. 2.
B-500-MTRX-230 Installation Manual 7.4. Switcher Location and Placement Binary matrix switchers are designed to deliver unsurpassed technology with superior performance. However, where you install the switcher can have a large effect on the performance that you receive, and the life of the unit. Here are some guidelines to follow when installing a B-500-MTRX-230 Switcher. • Be sure that the unit is in a well-ventilated area that provides adequate cooling.
B-500-MTRX-230 Installation Manual 7.5. HDMI Input Connections Each of the 8 or 16 inputs on the B-500-MTRX-230-8X16/16X16 utilizes a standard HDMI port for connection. Follow these guidelines when connecting sources to the inputs. • lways use the shortest cable possible between source equipment and the matrix switcher inputs. Use high speed A rated cables to guarantee the best possible performance. • Avoid using HDMI cable adapters in runs. Always run one unbroken cable when possible. 7.6.
B-500-MTRX-230 Installation Manual 7.6.3. HDBaseT Outputs Follow these guidelines when selecting and installing the HDBaseT cable, and then follow the instructions afterward to complete the connections for an output. 7.6.3.1. HDBaseT Wiring Recommendations Cable Type- Shielded or Unshielded Cat5e/6 • Cable Distance Limitations: Cat5e/Cat6: Up to 200 ft Cat6a: Up to 230 ft • se at least Category 5e high-quality twisted pair solid conductor cable rated to no less than 350 MHz bandwidth.
B-500-MTRX-230 Installation Manual 7.7. Matrix Control Connections All drivers, associated software and extra documentation are available on the B-500-MTRX-230 product page at www. SnapAV.com under the Support Tab. 7.7.1. IR Control The B-500-MTRX-230 can be controlled by IR flasher from the front panel receiver or by attaching a mono cable from the control system flasher output to the “System IR In” port on the back of the matrix switcher. For the most reliable control, use the System IR In port.
B-500-MTRX-230 Installation Manual 7.8. IR Pass-Through Installation and Setup To utilize IR pass-through between a display location and the matrix switcher, install a B-500-RX-230-IR at the display and use HDBaseT for routing the signal. The matrix switcher and the matrix receiver are equipped with ports to allow commands to be sent to the display or from the display area. This section details the pinouts and correct use of the IR pass-through ports. 7.8.1.
B-500-MTRX-230 Installation Manual 7.9. B-500-RX-230-IR IR Connections The B-500-RX-230-IR IR ports are described below. Use the diagram for reference. 1 2 7.9.1. IR Receiver Attach an IR receiver to this port to capture IR commands in the room for pass through to sources. This port will also send commands back to the matrix switcher for control of source selection in each zone. 12V DC (Sleeve) GND (Ring) IR Signal (Tip) IR Signal GND (Ground) +12V DC Tip Ring Sleeve 7.9.2.
B-500-MTRX-230 Installation Manual 7.10. IR Application Diagrams 7.10.1. IR Pass-Through from Control System 3.
B-500-MTRX-230 Installation Manual 7.10.2. IR Pass-Through from Rooms to Sources HDMI Source HDMI Source 256 PLAY IR Flasher HDMI 15 13 11 9 7 5 3 1 16 14 12 10 8 6 4 2 LINK LINK LINK LINK OUTPUTS IR Flasher HDMI 1 3 5 7 9 11 13 15 2 4 6 8 10 12 14 16 IR OUTPUT TO SOURCE LINK LINK LINK IR INPUT TO ROOM LINK ON IR INPUT TO ROOM IR OUTPUT TO SOURCE 12V DC 11.2A INPUT LINK LINK LINK LINK LINK LINK LINK LINK 12V DC 11.
B-500-MTRX-230 Installation Manual 8. EDID Configuration The displays used within an installation usually vary from room to room, and some may not support all resolutions available from a source. It is necessary to make sure sources will provide a video and audio format compatible with all connected displays programmed to use them. To accomplish this, the B-500-MTRX-230 includes built-in EDID management for each source input.
B-500-MTRX-230 Installation Manual 8.4. Embedded EDID Configuration In addition to the automatic configuration method, EDIDs in the B-500-MTRX-230 can be set to inputs manually by selecting an EDID from the embedded list (default EDIDs programmed into the matrix switcher). The matrix switcher contains eight ‘embedded’ EDIDs that may be assigned to inputs. These EDIDs define groups of video and audio capabilities that are useful for configuring sources in most systems. 8.4.1.
B-500-MTRX-230 Installation Manual 8.4.2. How to Set Embedded EDID for a Single Input Example: Input =1 Embedded EDID=4 Display Readout (Example) 3. Press INPUT 04 .. 04 .. 4. Press Number Key/s to select the Input to which the EDID is applied 04 . 0. 5. Press ENTER -- -FF FF 1. Press DEFAULT 2. Press Number Key (1-8) to select one Embedded EDID (success) (fail) 8.4.3. How to Set Embedded EDID for All Inputs Example: Input =1 Embedded EDID=4 1. Press DEFAULT 2.
B-500-MTRX-230 Installation Manual 8.5.2. How to Learn EDID to All Input Example: Input=All EDID Learned from Output 4 Display Readout (Example) 2. Press OUTPUT L._. -L._. -- 3. Press Number Key/s to select the Output the EDID i learned from. Use 10+ to select Outputs through 10-16 04 .. 4. Press ENTER -- -FF FF 1. Press LEARN (success) (fail) 8.6.
B-500-MTRX-230 Installation Manual 9. Advanced Setup Using the Configuration Utility There are several setup options available that can only be modified using the matrix switcher Configuration Utility. These items are defaulted to the most common settings that should work in most installations. The Configuration Utility and manual are available for download on the Support Tab of the B-500-MTRX-230 product page at www.SnapAV.com.
B-500-MTRX-230 Installation Manual 11. Operation and Control During setup and testing, use the included IR remote to control the matrix switcher. After setup is complete, a control method should have been setup and programmed as described in Section 7.7. Matrix Control Connections for regular operation. 11.1. IR Remote This section describes the correct button-push sequences to perform regular operations with the IR remote.
B-500-MTRX-230 Installation Manual Input to All Outputs Example: Output=All Input=4 Display Readout (Example) 1. Press OUTPUT -- -- 2. Press Number Key/s to select the Input. Use 10+ to select Inputs through 10-16 3. Press INPUT 04 1 4. Press Number Key/s to select Input 6. Press ENTER 11.1.2. Turn Off (Mute) Outputs Mute one Output Example: Output=1 Display Readout (Example) 1. Press OUTPUT -- -- 2. Press Number Key/s to select the Output.
B-500-MTRX-230 Installation Manual 11.1.4. Resetting to Factory Defaults This procedure resets the B-500-MTRX-230 to factory defaults: • EDIDs - 1080p 60 2 channel stereo (embedded 2) • I/O - All Outputs set to Input 1 Reset Factory Defaults 1. Press DEFAULT 2. Press DEFAULT 3. Press DEFAULT 4. Press DEFAULT 5. Press ENTER Display Readout (Example) Ed Ed Ed Ed 01 ----01 Note: Resetting factory defaults can take up to 2 minutes to complete.
B-500-MTRX-230 Installation Manual 12. Troubleshooting If issues arise during installation or testing of the B-500-MTRX-230, follow these guidelines to troubleshoot. Use the System Layout chart on the next page to record a description of each part of the system. If a problem cannot be solved using the methods listed here, fill out the System Layout Chart as completely as possible and contact Binary Tech Support for assistance at (866)838-5052. 12.1.
B-500-MTRX-230 Installation Manual 12.4. Audio Issues If a display on an output using 2 channel stereo audio is switched to an input with its EDID set to surround sound audio format, audio at the display speakers may be garbled, missing pieces of the audio track, or muted altogether. This symptom indicates that the display cannot down-convert the audio stream from the source. To fix this issue, the source must be set to output only 2 channel stereo audio.
B-500-MTRX-230 Installation Manual 14. System Layout Chart Use this chart to identify the sources and displays attached to the system, and make any notes about each part. When completing the outputs chart, make sure to indicate whether an HDMI cable, B-500-RX-230-IR, or another brand HDBaseT receiver is being used to extend signal to the display, and indicate the approximate length of any cables.
B-500-MTRX-230 Installation Manual Output Number Source Brand and Model Location HDMI or HDBaseT Cable Length Notes 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pg. 29 www.snapav.com Support: 866.838.
B-500-MTRX-230 Installation Manual 15. Specifications TECHNICAL B-500-MTRX-230-8X16 HDMI Compliance HDMI 3D HDCP Compliance Yes Video Bandwidth 6.75Gbps Resolution HDMI over UTP Transmission B-500-MTRX-230-16X16 Cat5e/ Cat6 Cat6a 1080i / 720p 24-bit color 200ft 230ft Full HD 1080P 24-bit color 200ft 230ft Full HD 1080P 36-bit deep color 200ft 230ft Input TMDS Signal 1.
130924-1054 © 2013 Binary™
