User Manual

B-100 HDMATRIX Installation and Users Manual 4X4 & 8X8
pg.16
5 OPERATION AND CONTROL
5.1 IR Remote
Key Funcon
1
ON Power on the matrix switcher
2
OFF Enter standby mode
3
Number Keys 1-9 Select a number
4
10+ Not Used
5
All Select all Inputs or Outputs
6
Enter* Enter to trigger the previous seng
7
OUTPUT Begin output selecon
8
INPUT Begin input selecon
9
OUTPUT OFF Turn o/Mute the selected Output
10
STATUS Present EDID or Output status
11
LEARN Learn EDID from one output
12
DEFAULT Begin Embedded EDID Selecon
13
CLEAR Clear the former IR operaon procedure which user just
pressed but has not yet applied by pressing ENTER
*The ENTER key must be pressed within 10 seconds of the last command in order to be processed.
POWER
1
ON OFF
23
OUTPUT
INPUT
OUTPUT
OFF
STATUS LEARNDEFAULT CLEAR
ALL
456
78
10+
ENTER
9
1 2
3
45 6
7
8
9
10 11 12 13
Input to Single Output
Example: Output=3 Input=4
Display Readout (Example)
1. Press OUTPUT
--
2. Press Number Key (1-8) to select Output
3-
3. Press INPUT
3-
4.Press Number Key (1-8) to select Input
34
5. Press ENTER
34
5.1.1 Route Inputs to Outputs
Input to All Outputs
Example: Output=All Input=4
Display Readout (Example)
1. Press OUTPUT
--
2. Press ALL to select all Outputs
A-
3. Press INPUT
A-
4. Press Number Key (1-8) to select Input
A4
6. Press ENTER
44