User Manual
B-100 HDMATRIX Installation and Users Manual 4X4 & 8X8
© 2011 Binary
pg.15
4.3 EDID Status
Once EDIDs are congured, the assigned EDID for sources can be reviewed to ensure that
the desired output is congured or for troubleshooting.
Example: Input=3
Display Readout (Example)
EDID 5 Assigned
from Embedded
EDID Table
EDID Learned
from Output 4
1. Press STATUS
-- --
2. Press INPUT
-- --
3. Press Number Key (1-8)to select the desired Input
-3 -3
4. Press ENTER
5.3. 4.3
• If the second digit (the Input being queried) has a dot after it, then the rst digit is
the EDID number from the Embedded EDID table.
• If the second digit (the Input being queried) does not have a dot after it, then the
rst digit is the Output the EDID was learned from.