User Manual

B-100 HDMATRIX Installation and Users Manual 4X4 & 8X8
pg.10
3.3.3 RS-232 DB9 Serial Connection
The RS-232 control port on the B-100-HDMatrix is used for connection to a Home
Automation System , conguration using the PC Conguration Utility (covered in separate
manual), and for Firmware updates. Details on serial protocol, future updates and how
to install them can be found under the Support tab for the B-100-HDMatrix on the
manufacturer’s website (www.snapav.com)
B-100-HDMatrix Home Automaon System
Pin 2 TxD (Data Transmit) Data Receive
Pin 3 RxD (Data Receive) Data Transmit
Pin 5 GND GND
3 25
DB9 Female Connecon
GND
Home Automaon Control Port
TxD –RxD
 RxD –TxD
In addition to the RS-232 DB9, the B-100-HDMATRIX-8x8 adds an Ethernet port that can be
used to control the device using Telnet Protocol. This port follows TIA 568 A/B standards,
refer to these when creating wiring.