User manual

terminals with switched off power supply unit briefly. Switch then the network on. The display for output current
displays,
depending upon adjustment of the adjusting knob for current limiting, a value. Stop the current limiting, i.e. the "
maximum stream ", with which the power supply unit is to limit. After adjustment they open the short-circuit with
switched off power supply unit, since otherwise an outline spark can develop. Series connection / parallel connection
around optimal base values to achieve and overloading avoid should become preset the sources with for instance the
same original data. Max. 2 sources in series may do geschalten to become.
Technical data
Specification type
3225.71
DC output voltage 0-30V 0-30V 0-40V 5 V
DC output current 0-4A 0-4A 0-3A 5A
CV stability net +5/-7% 2mV 2mV 2mV 5mV
CV stability load 0-100% 40mV 40mV 40mV
50m
V
CV remaining ripple Ueff 2mV 2mV 2mV 2mV
CC stability net +5/-7% 2mA 2mA 3mA
CC stability load 0-100% 3mA 3mA 3mA
CC remaining ripple I eff 2mA 2mA 3mA
correction time load 10-100% 100µs
adjuster Uoutput / Ioutput wirewound potentiometers ten turns / wirewound potentiometers ten turns
dissolution of adjusting 0,10%
characteristic U / I
display for U / I LCD 13 mm 3½-digit LED
Operating temperature 0 - 35°C
output connector 4 mm safety sockets
max. relative humidity 85% by 35°C
AC input voltage 230 V +5% / -7% 48-62Hz
AC testing voltages EN 61010 ; EN 61558-2-4
safety class I
dimensions WxHxD mm 451 x 134 x 324
weight kg 19
electromagnetic compatibility EN 61000-6-3 ; EN 61000-6-2
Statron Gerätetechnik GmbH
Ehrenfried-Jopp-Straße 59
15517 Fürstenwalde
Tel.: [phone]
Fax: [phone]
e-Mail : [e-mail]
Internet: www.statron.de