Datasheet

STATECH SYSTEMS AG STS Technical specification
sheet
STATIC SHIELDING BAGS
TYPE 6S1-…. and STS 909 (Flat and reclosable)
Electrical properties (typical values)
Surface Resistivity
Interior ASTM D257, EIA 541 10
9
- 10
10
Ohm / sq
Metal ASTM D257, EIA 541 100 Ohm / sq
Exterior ASTM D257, EIA 541 10
9
- 10
10
Ohm / sq
Static shielding MIL-B-81705C, EIA 541 < 30 V
EOS/ESD S11.31 < 10 nJ
Static decay MIL-B81705C, FTMS 101 MTH
4046
< 0,5 sec.
Charge generation Teflon 0.09 nC/sq.in.
Quartz 0.01 nC/sq.in.
Physical Properties (Typical values)
Tensile strength ASTM D882 > 25 lb
Seam strength MIL-B-81705C pass
Light transmission 40%
Heat sealing conditions Temperature 120-190°C
Time 0,5 -3,5 sec.
Pressure 30 -70 PSI
Thickness 3,1 mils
Outgassing ASTM E595 pass
Non-corrosive FTMS101, MTH 3005 pass
Structure: (Film)
Outside
Dissipative coating
Polyester
Aluminium shield
Dissipative polyethylene
Inside
Bags meets or exceeds: MIL-B-81705C Type III, EIA 541, EIA 625, MIL-HDBK-263,
MIL-STD-1686, EOS/ESD Standards, EN100015/1 / IEC 61340-5-1
The information set forth herein is intended for use by persons having technical skill at their own discretion and risk. Since
conditions of use are outside our control, we make no warranties. express or implied and assume no liability in connection with
any use of this information.
TB 909 /03.99B