Datasheet

Page 6/10
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 24.05.2018 Revision: 24.05.2018Version number 1
Trade name:(6'6SUD\$VWUD6WDW(6'W\SH6
(Contd. of page 5)
45.2.4
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
Material of gloves
Butyl rubber, BR
Recommended thickness of the material:
≥
0.7 mm
·
Breakthrough time of glove material
Value for the permeation: Level
≤
3
·
Eye protection:
_R
Tightly sealed goggles
*
SECTION 9: Physical and chemical properties
·
9.1 Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Aerosol
Colour:
According to product specification
·
Odour:
Characteristic
·
Odour threshold:
Not determined.
·
pH-value:
Not determined.
·
Change in condition
Melting point/freezing point:
Undetermined.
Initial boiling point and boiling range:
-24.9°C
·
Flash point:
-4°C (DIN 53213)
·
Flammability (solid, gas):
Not applicable.
·
Ignition temperature:
235°C (DIN 51794)
·
Decomposition temperature:
Not determined.
·
Auto-ignition temperature:
Product is not selfigniting.
·
Explosive properties:
In use, may form flammable/explosive vapour-air mixture.
·
Explosion limits:
Lower:
2.6 Vol %
Upper:
18.6 Vol %
·
Vapour pressure at 20°C:
5,200 hPa
·
Density at 20°C:
0.91 g/cm³ (DIN 53217)
·
Relative density
Not determined.
·
Vapour density
Not determined.
·
Evaporation rate
Not applicable.
·
Solubility in / Miscibility with
water:
Not miscible or difficult to mix.
·
Partition coefficient: n-octanol/water:
Not determined.
·
Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
(Contd. on page 7)
GB