Datasheet
www.statech.ch Page 1/1
Statech Systems AG
CH-8733 Eschenbach
Telefon: +41 55 286 23 53
Telefax: +41 55 286 23 54
Technical data sheet
Edition of:
29.05.2009
Replaces edition of:
---
ESD Spray AstraStat Type S (2K-PU)
General description
Description of the product
This paint is a permanently dissipative single layer 2-pack coat for high quality,
abrasion- and chemically resistant coatings on different objects such as
warehouse shelving, trolleys, tabletops, workpiece carriers, receptacles and
more. Resistance to earth as per IEC-Standard 61340-5-1 and SN 429 001
= 5x104, to <10
7
Ohm.
Basis of the product
Combination of acrylate-resin with aliphatic polyisocyanate
Field of application
For the equipment of permanently dissipative surfaces.
Delivery-for Standard colours
Light grey (approx. RAL 7035), pigeon blue (approx. RAL 5014),
red (approx. RAL 3000), black (approx. RAL 9005).
Special colours can be blended from a minimum order quantity of twelve cans.
Hardener
H40 PU
PUR-Hardener, inside the can (prefilled)
Gloss degree
Silk gloss
Packing
Can of 400ml
Important information for the coating with spray cans:
Before application, all surfaces have to be clean, dry and free of grease. Before use, shake the spray can vigorously for 3
minutes. Spraying distance should be 20-30cm. Pot life after activation (mix of hardener and painting) is approx. 5 hours.
If spraying is interrupted during this time, place the can upside-down and spray until there’s no painting left in the spraying
head. This avoids drying out of the painting inside the spraying head.
Shelf life (not activated) at 23°C
12 months
Safety data
Ask for Safety Data Sheet
Safety advice
Pressurized container. Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn,
even after use. Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition – No
smoking. Keep out of reach of children. In use, may form explosive vapour-air mixture. Extremely flammable. Irritating to
eyes. May cause sensitization by skin contact. Harmful to aquatic organisms, may cause long-term adverse effects in the
aquatic environment. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and
dizziness. Do not breathe spray. Avoid contact with skin and eyes. Wear suitable gloves. If swallowed, seek medical advice
immediately. Use only in well-ventilated areas. Attention: Special refuse, do not dispose with garbage.
Processing
Pot-life at 20°C
5 hours
Theoretical consumption
1,5 – 2m² / spray can
Minimum processing and drying-temp.
+10°C, relative air-humidity max. 80%
Drying-time
Dust dry after 5-10 minutes
Dry to touch after 20-30 minutes
Ready to mount after 2 hours
Precautions
The national working-hygienic – as well as the measurements for the technical
arrangements have to be fulfilled. Consult our safety data sheet!
All statements, technical information and recommendations contained herein are given for the purpose of information and
advice without obligation. Our products are under steady development-process. Therefore please check the date of this
document and ask for the latest issue. Actual processing always needs to be adapted to individual conditions. In special
cases, please contact our Technical Services.