Datasheet

Disclaimer: The information set forth herein is intended for use by persons having technical skill at their own discretion and risk. Since
conditions of use are outside our control, we make no warranties expressed or implied and assume no liability in connection with any
use of this information.
Electrostatic Dissipative Rubber Floor Matting
Electrical properties (typical values)
Resistance to ground (R
G
) IEC 61340-5-1
< 1x 10
9
Ω
Surface resistance (R
S
) IEC 61340-5-1
< 1x 10
9
Ω
Walking Test IEC 61340-4-5 < 10V
Mechanical properties (typical values)
Thickness 3mm
Abrasion DIN 53 516 130 mm
3
Hardness DIN 53 505 Shore A 80
Flammability DIN 51960 flame resistant
Structure:
2 layer, synthetic rubber. Upper layer grey, dissipative; back layer black, conductive
Environmental sustainability:
Environment-friendly in all aspects. Does not contain any softening agents, formaldehydes, Asbestos or
Cadmium (free of halogen). Does not generate poisonous or vitriolic vapours or gases in case of fire.
Disposal: recyclable. As domestic waste, on landfills or thermal recycling
STATECH SYSTEMS AG STS
Alte Schmerikonerstrasse 3, CH-8733 Eschenbach SG / Switzerland www.statech.ch , [e-mail]
Responsible: T. Buob
Version A: TBu
Date of 1. Issue: 15.09.2010
Version A: 09/2010
Technical data sheet
N°: 1S1130