Datasheet

according to Regulation (EC) No 1907/2006
Safety Data Sheet
STATECH SYSTEM AG STS
Cleanstat 250 A
Revision date: 10.05.2019 Product code: 954 Page 3 of 6
Maximum storage temperature: 25°C
7.3. Specific end use(s)
Notice the directions for use on the label.
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
8.2. Exposure controls
Take off contaminated clothing. Wash hands before breaks and after work. When using do not eat or drink.
Protective and hygiene measures
Wear eye protection/face protection.
Eye/face protection
When handling with chemical substances, protective gloves must be worn with the CE-label including the four
control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the
specific working place concentration and quantity of hazardous substances.
Recommendation:
Suitable material: NBR (Nitrile rubber)
Thickness of the glove material 0.1 mm
Breakthrough time (maximum wearing time) 480 min
For special purposes, it is recommended to check the resistance to chemicals of the protective gloves
mentioned above together with the supplier of these gloves. Tested protective gloves must be worn EN ISO
374
Hand protection
Wear suitable protective clothing.
Skin protection
In case of inadequate ventilation wear respiratory protection.
Respiratory protection
blue
Liquid
Physical state:
Colour:
9.1. Information on basic physical and chemical properties
SECTION 9: Physical and chemical properties
characteristic
Odour:
pH-Value:
6 - 8
Changes in the physical state
not determined
Melting point:
not determined
Initial boiling point and boiling range:
>60 °CFlash point:
Flammability
not applicable
Solid:
not applicable
Gas:
not determined
Lower explosion limits:
not determined
Upper explosion limits:
Auto-ignition temperature
Print date: 10.05.2019Revision No: 1 - Replaces version: 1 GB - EN