Datasheet

Disclaimer: The information set forth herein is intended for use by persons having technical skill at their own discretion and risk. Since
conditions of use are outside our control, we make no warranties expressed or implied and assume no liability in connection with any
use of this information.
Electrostatic dissipative rubber table matting
Propreties Unit Value Standards
Physical propreties
Thickness Mm 2
Abrasion mm
3
130 DIN 53 516
Hardness Shore A 80 DIN 53 505
Indentation hardness test Mm 0.13 DIN 51 955
Weight
Kg/m
2
2.7
Light reflectance factor
% 19 - 29
DIN 5036
Flammability
of low flammability
DIN 51960
Electrical propreties
Resistance to ground (R
A
) Ω 10
5
-10
7
IEC 61340-5-1
Volume resistance (R
V
) Ω 10
5
-10
7
IEC 61340-5-1
Surface resistance (R
O
) Ω 10
5
-10
7
IEC 61340-5-1
Decay time 5000V/ 500V
s <0.1
MIL-B81705C
Structure: Type 1S191: 2 layer, synthetic rubber – upper layer (Color) slightly
structured, Back layer black, conductive, “anti glide” structure
Environmental sustainability: environment-friendly in all aspects. Does not contain any softening
agents, formaldehydes, Asbestos or Cadmium (free of halogen).
Does not generate poisonous or vitriolic vapours or gases in case of
fire.
Disposal: recyclable. As domestic waste, on landfills or thermal recycling
STATECH SYSTEMS AG STS
Alte Schmerikonerstrasse 3, CH-8733 Eschenbach SG / Switzerland www.statech.ch , [e-mail]
Responsible
Version A: TBu
Date of 1. Issue:
Version A: 01/2011
Technical data sheet
N°: 1S-191