State Water Heater Water Heater Brochure

140 SERIES
Specifications
The 140 Series is a high efficiency, ultra-low NOx condensing model with up to 0.91
Uniform Energy Factor, allowing for the use of 3”or 4” PVC venting or Category IV
stainless steel. Indoor models have an integrated temperature controller and outdoor
models include a remote control as a standard feature.
Model Number* Type
Gas Consumption Input Inlet Gas Pressure**
UEF
Minimum
(BTU/H)
Maximum (BTU/H) Minimum (in. W.C.) Maximum (in. W.C.)
GTS-140-NIH Natural 15,000 120,000 4.0 10.5 0.90
GTS-140-NEH Natural 15,000 120,000 4.0 10.5 0.91
Model Number*
Maximum
GPM
Hot/Cold
Connections
Gas
Connection
Clearances (in.)
Approx
Shipping
Weight (lbs)
Top Bottom Side Front
GTS-140-NIH 6.6 3/4" NPT 1/2" NPT 12 12 3 4 54
GTS-140-NEH 6.6 3/4" NPT 1/2" NPT 36 12 3 24 52
*For propane models, change “N” to “P”
**For propane models, minimum fire is 13,000 BTU/H, minimum inlet gas pressure is 8.0 in. W.C. and maximum inlet gas pres-
sure is 14.0 in. W.C.
ANSI Z21.10.3 • CSA 4.3
CONDENSING
140
Temperature
Settings
Dipswitches 120°F (default) 140°F
With 100209924 remote (max. distance 400’ from heater, non-polarized 120 gauge wiring.)
100°F to 140°F with 5°F intervals (9 options), 120°F Default Factory Setting
Electric 120 V 54 W / 0.7 A (Operation) 3 W / 0.05 A (Standby) 224 W / 2 A (Freeze-Protection)
GTS-140-NEHGTS-140-NIH
29