User Manual

Dual-lens Mega-pixel IP Camera
6
1. Introduction
The IP Camera is designed for all day video surveillance on your iPhone/iPad
and Android mobiles/pads. The setup is truly 1-2-3 :
1. Connect the camera to the network
2. Download the app mCamView into your iPhone/iPad or Android
3. View video by the camera ID/password
The push notification is supported, so that you will get the notification from your
iPhone/iPad and Android once there is any events detected through the PIR body
sensor or sound detector on the camera, even when your mobile is on sleep mode.
The SD card recording is supported, and you could playback the recorded video
on your iPhone/iPad and Android. You could also do the SD card recording only when
there is PIR or sound detection to save the SD card storage size. The PIR and sound
detected recording has a 5 seconds pre-recording, so that you will always catch the
critical moment.
For day & night usage, there are two video sensors/lens on the camera, one for
day and one for night. The day lens and night lens focus are separately tuned for day
light and Infra Red light for best video quality. No ICR, no mechanical problem.
Two-way audio is supported. You can monitor the synchronized video/audio and
talk to or warn the people around the camera from your iPhone/iPad and Android once
you got the push notification. There is a built-in speaker and a speaker jack is
provided so that you could connect any high power speaker to the camera for your
needs.
The WPS(WiFi Protected Setup) is supported. You could set up the WiFi
connection of the camera with the router by clicking the WPS button on the camera
and on the router at the same time. No more complicated WiFi configuration.
An infrared thermometer is provided. You could monitor the temperature of the
environment of the camera. And you could setup the camera to trigger alarm when the
environment temperature is out of a specified range.
The IP camera is ideal for securing small businesses, home offices and