User Manual

Dual-lens Mega-pixel IP Camera

Third, unplug the Ethernet cable

If the WiFi test is successful, you can then enable the WiFi connection by unplugging

the Ethernet cable from the IP CAM. The IP CAM will detect the Ethernet cable

unplugged condition and start the WiFi connection. After the WiFi is connected, the IP

CAM will connect to the Internet immediately.

Notice :

1. Please remember that the WiFi connection will use a different IP address, you will

need to do the “Auto Search” function in the CamView again to find the IP CAM

again after the WiFi is connected.

2. If you want to switch back to the wired Ethernet connection, just plug in the

Ethernet cable into the IP CAM again. Do not need to disable the WiFi function on

the web pages.

Figure 2-9: Unplug the Ethernet cable to enable the WiFi function

2.5. Push notification

The IP CAM supports push notification when using the iPhone/iPad or Android

devices. So that when there is alarm from PIR, motion detection or sound

detection, your mobile device will receive alarm notification. You can

immediately playback the recorded video(if SD card inserted) or do a live view.

Please download the “mcamview” app from App Store for iPhone.

Please download the “mcamviewHD” app from App Store for iPad.

Please download the “mcamview” app from Android Market for Android

devices