User manual
Table Of Contents
4 Installation
The device is powered by a rechargeable lithium-ion battery. Use only the included lithium-ion
battery or a spare battery with identical specications (see
Ä
Chapter 6 ‘Technical specications’
on page 25).
Use the included USB charging cable for charging the inserted battery. Connect the device to
the USB port of a PC for charging via this cable.
After playing the Silicone keyboard, roll it up loosely and keep the unit in its original pack‐
aging. Do not kink the Silicone keyboard.
The unit automatically switches to standby mode when you don't press any key for about 5
minutes. To reactivate the device into normal operating mode press any key of the keyboard.
Installation
MKR 61
13