User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Mobile Workstation Cart with Monitor Mount, CPU/PC Holder, Keyboard Tray, Ergonomic Height Adjustable Desktop Computer Cart, Rolling Mobile Standing Workstation on Wheels Portable Stand-Up Cart - cart - for LCD display / keyboard / mouse / CP
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
3. (Optional -- for Monitors with recessed VESA Mounting
Holes, for Monitors with uneven rear geometry, or to adjust
the engagement depth of the provided Screws) Add the
necessary number of Spacers (M-F) between the Monitor
and the VESA Plate.
4. Align the VESA Plate over the VESA Mounting Holes or
(optional) Spacers (M-F) located on the back of the Monitor.
The side of the VESA Plate that features the threaded hole
should be pointing towards the top of the Monitor.
5. Place four Washers (Large) (M-E) over each VESA
Mounting Hole.
6. Thread the appropriate size and length of M-Type Screws
(e.g. M4 x 12 mm Screws (M-A)) through the Washers
(Large) (M-E), VESA Plate, (Optional) Spacers (M-F), and
into the Monitor.
7. Tighten the M-Type Screws, using a Phillips Head
Screwdriver, until each Screw sits ush with the surface of
the VESA Plate.
Warning! Do not overtighten the M-Type Screws. If any
unexpected resistance is encountered while fastening these
Screws, immediately stop and attempt to use a
dierent length of M-Type Screw.