User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Mobile Workstation Cart with Monitor Mount, CPU/PC Holder, Keyboard Tray, Ergonomic Height Adjustable Desktop Computer Cart, Rolling Mobile Standing Workstation on Wheels Portable Stand-Up Cart - cart - for LCD display / keyboard / mouse / CP
15
1. Loosen (but do not remove) the Hex Screw located on the
side of the VESA Mount (H), using the 6 mm Hex Key (N).
(Figure 7)
2. Tilt the VESA Mount (H) down to access the top-back
Mounting Hole. Insert an M8 x 30 mm Screw (I) through
the Mounting Hole located at the top-back of the VESA
Mount and into the Column (B) then tighten, using the 5
mm Hex Key (M).
3. Tilt the VESA Mount (H) upwards to access the top-back
Mounting Hole. Insert an M8 x 30 mm Screw (I) through
the Mounting Hole located at the bottom-back of the VESA
Mount and into the Column (B) then tighten, using the 5
mm Hex Key (M).
4. Tighten the Hex Screw located on the side of the VESA
Mount (H), using the 6 mm Hex Key (N) and press the
Column Cap (G) onto the top of the Column (B).
Remove the VESA Plate from the VESA Mount (H)
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Figure 8