User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Mobile Workstation Cart with Monitor Mount, CPU/PC Holder, Keyboard Tray, Ergonomic Height Adjustable Desktop Computer Cart, Rolling Mobile Standing Workstation on Wheels Portable Stand-Up Cart - cart - for LCD display / keyboard / mouse / CP
9
Requirements
For the latest requirements, please visit
www.startech.com/WKSTNCART
• Phillips Head Screwdriver x 1
Installation
Note: Do not overtighten any of the screws.
Attach the Caster (C)
1. Flip the Base (A) upside down and place it onto a clean and
at surface. (Figure 1)
Note: Cover hard oors with a soft cloth to prevent
scratching.
2. Insert the four Caster (C) into the holes, located in the
bottom of the Base (A) and tighten, using the Wrench (O).
3. Flip the Base (A) upright.
4. Lock the Caster (C) by pressing down on the Brake, located
on top of each of the four Caster (C). (Figure 2)
5. (For uneven surfaces - adjust the height of the Caster (C))
Flip the Base (A) upside down and use the Wrench (O) to
adjust the Nuts located on each Caster (C).
Figure 1 Figure 2
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support