Operation Manual

Instruction Manual

Introduction

Packaging Contents

• VGA+HDMI to VGA Converter Switch (VS221HD2VGA)

• Mounting Bracket Set

• Universal Power Adapter (NA/EU/UK)

• Instruction Manual

Note: The VS221HD2VGA will not display digitally encrypted

content from your HDMI-enabled Video Source Device.

System Requirements

• HDMI-enabled Source Device w/ HDMI Cable (i.e. computer)

• VGA-enabled Source Device w/ VGA Cable (i.e. computer)

• VGA-enabled Display Device w/ VGA Cable (i.e. monitor, projector)

• 2x 3.5mm audio cable (Optional for audio support)

Hardware Installation

1. Using an HDMI cable (not included), connect your HDMI-enabled Video Source

Device to the HDMI Audio/Video Input#1 Port on the VS221HD2VGA.

2. Using a VGA cable (not included), connect your VGA-enabled Video Source Device

to the VGA Audio/Video Input#2 Port on the VS221HD2VGA.

3. (Optional) If your VGA-enabled Video Source Device includes an audio output,

connect the audio source output on the device to the 3.5mm Audio Input#2 Port

on the VS221HD2VGA using a 3.5mm Audio Cable (not included).

4. Using a VGA cable (not included), connect your VGA-enabled Display Device to the

VS221HD2VGA.

5. (Optional) If your VGA-enabled Display Device supports audio, connect a 3.5mm

audio cable (not included) from the VS221HD2VGA to the Audio input port on your

Display Device.

Note: You can alternatively use a separate audio output device such as PC speakers,

or a Home Theatre system.

6. Using the included Power Adapter, connect the Power Adapter Port on the

VS221HD2VGA to an available power outlet.

7. Turn on the VGA-enabled Display Device, followed by each of the HDMI & VGA-

enabled Video Source Devices (HDMI/VGA).