User Manual

7
Instruction Manual
Congure the capture device using the UVC Utility
Each of the following settings can be set to your desired conguration from within
the UVC Utility. Once these congurations are set, they’ll remain as they’re left until
manually changed. To change the parameters of these settings, the UVC Utility can be
launched again and the setting recongured.
Audio Input:
The Audio Input: section of the UVC Utility enables you to choose the audio input(s)
that the capture device will pass to your capture software.
Available Audio Input: options
• HDMI - Passes audio from the video source device that’s connected to the capture
device’s HDMI In port.
• Line-in - Passes audio from the audio source that’s connected to the capture
device’s Audio In port. The audio levels will be optimized for an audio playback
device.
• Mic - Passes audio from the audio source that’s connected to the capture device’s
Audio In port. The audio levels will be optimized for a microphone.
• HDMI + Line-in - Combines and passes the audio from the devices that are
connected to the capture device’s HDMI In port and Audio In port. The audio levels
will be optimized for an audio playback device.
• HDMI + Mic - Combines and passes the audio from the devices that are connected
to the capture device’s HDMI In port and Audio In port. The audio levels will be
optimized for a microphone.
To set the Audio Input: conguration
1. Select your desired audio input from the Audio Input: option.
Your desired conguration has been set.
Data Transfer Pipe:
The Data Transfer Pipe: section of the UVC Utility enables you to choose the method
in which the audio and video from the capture device is digitized and passed to your
capture software.
Available Data Transfer Pipe: options