User Manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product Diagram (USB3SDOCKDD)
Port Function
1 Power LED
• Solid Green indicates that the Docking Station
is powered On.
2 3.5mm Headset Port
• Used to connect a Headset to the Docking
Station.
3 USB-A Ports (2)
• Used for fast charge and data (e.g. Cell Phone,
Tablet, ash drive, etc.).
Port Function
1 DC Input Port • Used to power the Docking Station.
2 USB-B (upstream)
• Used to connect a Host Computer to the
Docking Station.
3 DVI-I Port
• Used to connect a Display Device to the
Docking Station.
4 DVI-D Port
• Used to connect a Display Device to the
Docking Station.
5 RJ-45 Port
• Used to connect a network connection to the
Docking Station.
6 USB-A Ports (3)
• Used for trickle charge providing and data
throughput.
USB 3.0 Laptop Docking Station | Dual DVI Video | 2x USB Charging Ports | USB 3.0 Hub | GbE
1
Requirements
For the latest requirements, please visit www.startech.com/USB3SDOCKDD.
• USB enabled computer system with an available USB 3.0 port
• Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP SP3 (32), Mac OS® 10.6 and up
(Tested up to 10.10)
• DVI, HDMI® or VGA enabled display device(s)if desired (for additional external
monitors) with cables
Note: Only a USB 3.0 port interface and USB 3.0 cable can be used to connect the
Docking Station to the host computer.
Installation
Driver Installation
1. Using a Web Browser, navigate to www.startech.com/USB3SDOCKDD.
2. On the Product page, click the Support tab located in the middle of the screen.
3. In the Drivers and Downloads section, click on the driver link that corresponds with
the operating system running on the host laptop.
Windows
1. Once the download is complete, right-click on the .zip fold and select Extra All from
the pop-up menu and follow the on-screen prompts.
2. A list on extracted les will appear, right-click the Setup.exe le and select Run as
Administrator from the pop-up menu and follow the on-screen prompts.
3. Once the drivers are installed and the Host Computer has restarted, connect the
Docking Station to the Host Computer. The Host Computer will automatically
nalize the driver installation.
Mac
1. Once the download is complete, double click on the following paths: DisplayLink.
zip le - MacOs folder - OS 10.8 - 10.2 folder - DisplayLink Installer 75598.dmg
le.
2. Follow the on-screen prompts.
3. Once the drivers are installed and the Host Computer has restarted, connect the
Docking Station to the Host Computer. The Host Computer will automatically
nalize the driver installation.
2
4
3
1
2 3 4
5
6