Operation Manual

Instruction Manual
4
Hardware Installation
Note: Please ensure the Software Installation steps have been completed prior to
beginning Hardware Installation steps.
1. Using the included USB 3.0 cable, connect the USB3HDCAP to an available USB 3.0
port on your computer system.
2. Using the required video source cabling (not included) connect your video source
(DVD, DVR, VCR, Etc.) to the USB3HDCAP.
a. If your video source is Component, S-Video, or Composite, use the included A/V
breakout cable to connect your Audio/Video source cabling to the A/V breakout
cable input port on the USB3HDCAP. Please see Product Diagram on Page 1 for
reference.
b. If your video source is HDMI or DVI, connect your audio/video source cabling
directly to the HDMI audio/video input port or DVI video input port (respectively) on
the USB3HDCAP.
c. If your video source is VGA, use the included DVI to VGA video adapter to connect
your VGA video source cabling to the DVI video input port on the USB3HDCAP
d. (Optional) If you would like to capture a 2-channel RCA audio source along with
your video source, connect your RCA audio source cable to the A/V breakout cable
input port on the USB3HDCAP along with your desired video source cabling.
Hardware installation is now complete.