User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com USB 3.0 to 4 HDMI Adapter, External Video & Graphics Card, USB Type-A to Quad HDMI Monitor Display Adapter Dongle, 1080p 60Hz, USB 3.0 to HDMI Adapter/Video Converter, Windows Multi Monitor Adapter - adapter cable - HDMI / USB - 1 m

Quick-Start Guide

Product Diagram (USB32HD4 & USBC2HD4)

Component Function

(USB32HD4) USB-A

Host Connector

• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)

• (USB32HD4) Connect to a USB-A Enabled Host

Computer

(USBC2HD4) USB-C

Host Connector

• SuperSpeed USB 5Gbps (USB 3.2 Gen 1)

• (USBC2HD4) Connect to a USB-C Enabled Host

Computer

3 HDMI Ports x 4 • Connect up to 4 HDMI Enabled Display Devices

Product Information

“For the latest product information, technical specications, manuals, and Declarations

of Conformance please visit: www.StarTech.com/USB32HD4 or www.StarTech.com/

USBC2HD4”

Package Contents

USB32HD4

• USB-A to HDMI Adapter x 1

• Quick-Start Guide x 1

USB to 4 X HDMI Display Adapter

USBC2HD4

• USB-C to HDMI Adapter x 1

• Quick-Start Guide x 1

Driver Installation

Installation is automatic for Windows 10 in most situations. If the drivers do not auto-

install, contact your IT administrator or department to allow the driver installation. Visit

www.startech.com/USB32HD4 or www.startech.com/USBC2HD4 to locate the latest

drivers.

Note: This USB video adapter uses a Trigger family chipset. If you’re connecting this

device to a computer along with additional USB video adapters or docking stations,

avoid using devices with dierent family chipsets, such as DisplayLink® or Fresco Logic

Note: ®Operating system requirements are subject to change. For the latest

requirements, please visit www.StarTech.com/USB32HD4 or www.StarTech.com/

USBC2HD4

Installation

Connect a Host

USB32HD4

• Connect the USB-A Host Connector of the USB-A to HDMI Adapter to a USB-A

Port on a USB-A Enabled Host Computer.

USBC2HD4

• Connect the USB-C Host Connector of the USB-C to HDMI Adapter to a USB-C

Port on a USB-C Enabled Host Computer.

Connect the Display Devices

• Connect an HDMI Enabled Display Device to the HDMI Port of the USB to 4 X

HDMI Display Adapter using an HDMI Cable.

• (Optional) Repeat to connect up to 4 x extended or mirrored HDMI Enabled

Display Devices.

Arrange Display Devices

• Arrange connected Display Devices using Windows Display Settings on the Host

Computer.

*product may vary from photos

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: May 7, 2021 11:30 AM

Summary of content (2 pages)

PAGE 1
Quick-Start Guide USB to 4 X HDMI Display Adapter Product Diagram (USB32HD4 & USBC2HD4) 1 2 USBC2HD4 • USB-C to HDMI Adapter x 1 • Quick-Start Guide x 1 Driver Installation Installation is automatic for Windows 10 in most situations. If the drivers do not autoinstall, contact your IT administrator or department to allow the driver installation. Visit www.startech.com/USB32HD4 or www.startech.com/USBC2HD4 to locate the latest drivers. Note: This USB video adapter uses a Trigger family chipset.
PAGE 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.