3 Port SuperSpeed USB 3.0 Hub with 1x Gigabit Ethernet Port ST3300U3S *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction The ST3300U3S SuperSpeed USB 3.0 Hub with Gigabit Ethernet adapter allows you to add 3 additional USB 3.0 ports and a RJ45 Gigabit Ethernet port through a single SuperSpeed USB 3.0 connection to the host comptuer system. With Gigabit Ethernet NIC support, connect to your home or office network at full bandwidth, with support for 10/100/1000Mbps networks, unlike USB 2.0 adapters. Backwards compatible with USB 2.0 and USB 1.x standards, this USB 3.
USB 3.0 A Green: Activity (Blinking) DC Power Blue: Power Green: Network Link (Solid) USB 3.
Installation 1. Connect the included power adapter to the USB hub. The power LED should light up solid. NOTE: Supplying external power is optional, however to ensure each USB port is fully powered, connecting external power is recommended. 2. Connect an Ethernet cable into the RJ45 port on the USB Hub. Connect the other end into your router, switch, or other networking device. 3. Connect the supplied USB cable from the USB hub (Micro B port) to a USB port on the host computer system.
Verifying Installation Windows 1. From the main desktop, right-click on “My Computer” (“Computer” in Vista/7/8), then select Manage. In the new Computer Management window, select Device Manager from the left window panel. 2. Under the “Network adapters” heading, there should be a new listing for “ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter.” 3. Under the “Universal Serial Bus controllers” heading, there should be new listings for the USB hub.
Specifications Bus Interface USB 3.0 Number of Ports 3 x USB 3.0 1 x Gigabit Ethernet Chipset ID ASIX AX88179 + VIA VL811 Connectors 3 x USB 3.0 type A female 1 x USB 3.0 type micro B female 1 x RJ45 Ethernet female 1 x DC Power LEDs 1 x Blue: Power 1 x Green: Network Link (solid) / Activity (blinking) Maximum Data Transfer Rate 5Gbps (USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
