User Manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 25, 2019 9:17 AM
Product Diagram (US2GA30)
Port/LED Function
1 RJ45 Port • Used to connect to a Network Device.
2 LED
• Solid Blue: Indicates that the CAT5/6a cable is
connected to the RJ45 port with a link speed of
2.5Gbps.
• Solid Green: Indicates that the CAT6a cable
is linked to the RJ45 port with a link speed of
1Gbps/100Mbps/10Mbps.
• O: Indicates no connection.
3 USB-A Connector
• Used to connect the Network Adapter to the
Host Computer.
Requirements
For the latest requirements, please visit www.startech.com/US2GA30.
USB-A™ 2.5Gb NBase-T Network Adapter
Installation
Hardware Installation
1. Connect a CAT5/6a Cable to the RJ45 Port on the Network Adapter and to a
Network Device.
2. Connect the USB-A Connector on the Network Adapter to a USB-A port on the
Host Computer.
Driver Installation
1. If the Drivers do not automatically download when you connect the Network
Adapter to the Host Computer, a message that a Virtual CD is loaded will appear.
2. Click on the message, the CD Drive screen will open.
CD Drive screen
3. Click on the folder that is compatible with your Host Computer and run the RTK_
NIC_DRIVER_INSTALLER le to begin the background installation.
1
3
2