Operation Manual

Instruction Manual
2
Installation
Hardware Installation
1. Connect the USB type A connector (host) into an available USB 2.0 port on your
computer system.
2. Connect your analog video source (DVD, DVR, VCR, Etc.) to the composite or S-Video
input on the SVID2USB23 AV Cable.
NOTE: After you connect the physical hardware to the computer it is likely that you
may receive prompts for installation. Please close these specic prompts as these
steps will be performed during software installation.
Software Installation
Windows®
After Hardware Installation the “Found New Hardware Wizard” will open, click “Cancel”
to close the window.
1. Download the latest drivers from the StarTech.com website (recommended), or
insert the included Driver and Software Disk into your DVD-ROM drive.
2. Locate the Setup(.exe) application. This le will be located in Windows directory
in the downloaded folder, or if using the included Driver and Software DVD the
installation will begin automatically.
USB type A
connector (host)
S-Video connector
(input)
RCA connector
(input)