Owners manual

Instruction Manual

Introduction

Thank you for purchasing a StarTech.com KVM extender. This product

allows a computer to control a host system from a remote location

at a distance of up to 984 feet (300 meters). For ease of installation,

this product uses standard Category 5, 5E, or 6 network cabling that

ﬁts easily into almost any existing network infrastructure. For added

versatility, the KVM extender supports either PS/2 or USB computer

interfaces. Console support is provided using standard USB and VGA

connectors.

Features

• Can be used with a single computer or connected to an existing KVM

switch

• Easy installation using industry-standard UTP network cable

• Intuitive hotkey commands

• Supports auto-switching between host and remote users or dedicated

control

• USB computers are supported at the host and remote locations (USB

keyboard and mouse required for remote console)

System Requirements

• 1 x StarTech.com integrated KVM cable for each, the host (included)

and remote (optional) computer connections. If necessary,

longer cables are available, StarTech.com ID: SVECONx (PS/2),

SVECONUSx (USB)

• Unshielded Category 5/5e/6 twisted pair (UTP) straight-through

network cable terminated at each end with RJ-45 connectors (if using

surface cabling)

• Unshielded Category 5/5e/6 twisted pair (UTP) straight-through

network cable terminated at each end in a wall-mounted outlet, with a

standard Category 5/5e/6 patch cable, at both locations (if using

premises cabling)

NOTE: The total length of cable between the Host and Remote Units