Owners manual

Instruction Manual

Beep Codes

Some of the keyboard command sequences you issue to the Remote Unit

have multiple possible settings. The Unit will beep to indicate what setting

you have selected for the command you issued. (A short beep followed

by a long beep indicates an invalid command.)

[Ctrl] - [Ctrl] - [Alt]+[E] (Compatibility Mode)

1 beep: disabled

2 beeps: enabled

Note: Commands described in the [Key] - [Key] format are keys that

must be pressed in order on the keyboard. Commands described in the

[Key]+[Key] format must be pressed simultaneously.

Note: If the Num Lock, Caps Lock, and Scroll Lock lights are ﬂashing

in unison on the keyboard, the other Unit has control of Computer A.

You will not be able to use A until the other Unit releases access to that

computer.

Standard Command

With Compatibility

Mode Enabled

Description

[Ctrl] - [Ctrl] - [F2] [Ctrl] - [Ctrl] - [E] - [F2]

Toggles console control

between Computer A and

Computer B

[Ctrl] - [Ctrl] - [V] - 4

digit code

[Ctrl] - [Ctrl] - [V] - 4

digit code

Set the maximum video

resolution (requires computer

restart) for both Remote and

Host units.

See page 11 for codes.