Owners manual

Instruction Manual
12
Using the Remote Unit
The Remote Unit allows a user at the Remote Unit to assume control
of devices connected to the Host Unit, if the Host Unit is set to Auto or
Remote mode, and it also permits the user seated at the Remote Unit to
use any connected system as though the KVM Extender was transparent.
You can use either keyboard shortcuts or the mode switch on the top
of the Remote Unit to alternate control between A and B. Unlike the
Host Unit, however, the switch on top of the Remote unit only offers two
selectable modes:
Local Remote
LED Indicators
Mode
A Indicator B Indicator
Remote Access (Computer A) On (solid) Off
Local Access (Computer B) Off On (solid)
Keyboard Shortcut Command Sequences
Standard Command
With Compatibility
Mode Enabled
Description
[Ctrl] - [Ctrl] - [T] [Ctrl] - [Ctrl] - [T]
Toggles console control
between Computer A and
Computer B
[Ctrl] - [Ctrl] - [Esc] [Ctrl] - [Ctrl] - [Esc] Cancels the hotkey sequence
[Ctrl] - [Ctrl] - [Alt]+[E] [Ctrl] - [Ctrl] - [Alt]+[E]
Enables (2 beeps) or disables
(1 beep) Compatibility Mode so
that the KVM extender will work
with a KVM switch that also
uses a [Ctrl] hotkey sequence
[Ctrl] - [Ctrl] - [1] [Ctrl] - [Ctrl] - [E] - [1] Switches control to Computer B
[Ctrl] - [Ctrl] - [2] [Ctrl] - [Ctrl] - [E] - [2]
Switches control to Computer
A (input allowed only if the
Host Unit is in Remote or Auto
mode)