Owners manual

Instruction Manual
11
Beep Codes
Some of the keyboard command sequences you issue to the Host Unit
have multiple possible settings. The unit will beep to indicate what setting
you have selected for the command you issued. (A short beep followed
by a long beep indicates an invalid command.)
[Ctrl] - [Ctrl] - [Alt]+[E] (Compatibility Mode)
1 beep: disabled
2 beeps: enabled
[Ctrl] - [Ctrl] - [F3] (Inactivity Interval for Auto Mode)
1 beep: 5 seconds
2 beeps: 15 seconds
3 beeps: 30 seconds
4 beeps: 60 seconds
Note: Commands described in the [Key] - [Key] format are keys that must be
pressed in order on the keyboard. Commands described in the [Key]+[Key] format
must be pressed simultaneously.
Note: If the Num Lock, Caps Lock, and Scroll Lock lights are flashing in unison
on the keyboard, the other Unit has control of Computer A. You will not be able to
use the computer or issue commands until the other unit has finished using the
computer.
As EDID display information is not passed through the extender to the computer,
manually setting the maximum display resolution on the extender may be necessary
for content to display correctly on the connected monitors.
4-Digit Code Resolution 4-Digit Code Resolution
1007 1024x768 1609 1600x900
1208 1280x800 1612 1600x1200
1210 1280x1024 1610 1680x1050
1307 1360x768 1910 1920x1080
1409 1440x900 1912 1920x1200
1410 1440x1050