User Guide

Instruction Manual

Set Maximum Video Resolution

By default the KVM switch is set to output an EDID signal with a maximum video

resolution of 1024 x 768 to the host computer systems. To be able to set a higher video

resolution on the host computer systems, use the following command with the 4 digit

code for the maximum video resolution you wish to set.

NOTE: Do not use the numeric keypad for entering the 4-Digit Code. Only use the

number keys along the top row of the keyboard.

Left <CTRL>, Left <CTRL>, V, 4 digit code

4-Digit Code Resolution 4-Digit Code Resolution

1007 1024 x 768 1612 1600 x 1200

1208 1280 x 800 1610 1680 x 1050

1210 1280 x 1024 1910 1920 x 1080

1307 1360 x 768 1912 1920 x 1200

1409 1440 x 900 1914 1920 x 1440

1410 1440 x 1050 2011 2048 x 1152

1609 1600 x 900

NOTE: You may need to reboot the host computer(s) for the new settings to take

aect. If not done automatically by the host computer’s operating system, you may

then need to manually adjust the display settings to the new maximum resolution.