Operation Manual

Instruction Manual

*installation pictures are representations only

1. Plug a monitor into the Console’s DisplayPort connector; plug a USB keyboard and a

USB mouse into the dedicated USB keyboard and mouse ports on the KVM switch. If

using audio, also connect speakers and/or a microphone with 3.5mm mini-jack plugs.

2. Use a male-to-male DisplayPort video cable to connect the DisplayPort connector

on the computer’s video card, to one of the KVM’s PC ports (i.e. PC1)

3. Use a USB type A-B Cable to connect the KVM’s USB port (type B, square connector)

for the PC port used in Step 2, and the USB port on the computer (type A, at

connector). If using audio, connect 3.5mm mini-jack cables from the PC port to the

computer sound card.

NOTE: A DisplayPort + USB + Audio KVM combo cable is also available which can be