Operation Manual
Instruction Manual
1
Introduction
Features
• Easy installation, no drivers required
• Supports Plug and Play and hot swap to save time from rebooting the computer
• Supports data transfer rates up to 480Mbps when used on a USB 2.0 port
Package Contents
• SV231DPUA or SV431DPUA KVM switch
• Power Adapter
• Rubber Feet
• Instruction Manual
System Requirements
• DisplayPort enabled computer system/video card
• USB enabled computer system
• DisplayPort enabled display device (e.g. monitor, projector, TV, etc.)
• Standard 104-key wired USB keyboard
• Standard 3-button wired USB mouse
Installation
NOTE: Prior to the installation, please power o all devices that will be connected to
this system. Ensure that all devices you will connect are properly grounded. Place
cables away from uorescent lights, air conditioners, and machines that are likely to
generate electrical noise.
If you experience any problems using a USB KVM switch, the following BIOS setup
changes may be necessary for PC users and not necessary for Mac users:
• Set HALT ON ERROR to ALL BUT KEYBOARD.
• In PNP AND PCI SETUP, set PNP OS INSTALLED to YES and set USB IRQ to ENABLED.
Dierent systems may use dierent naming, so contact your system manufacturer for
further assistance with these settings.