2-Port KVM Switch with Dual DisplayPort - 4K 60Hz SV231DPDDUA2 *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com IT: Guida per l’uso - it.startech.com For the latest information, technical specifications, and support for this product, please visit www.StarTech.com/SV231DPDDUA2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Product diagram......................................................................................................................................... 1 Package contents....................................................................................................................................... 2 System requirements...........................................................
Technical support....................................................................................8 Warranty information.............................................................................
Introduction You can use the SV231DPDDUA2 to control two computers enabled with DisplayPort™ 1.2, and share USB 2.0 peripherals among the connected computers. If you connect monitors enabled with DisplayPort 1.2, the SV231DPDDUA2 supports 4K at 60Hz. This two-port dual monitor KVM switch includes 3.5 mm audio speaker and microphone ports, and a select button that you can use to quickly switch between connected computers. SV231DPDDUA2 also features support for hotkey commands.
Package contents • 1 x KVM switch • 1 x universal power adapter (NA, EU, UK, ANZ) • 4 x rubber pads • 1 x instruction manual System requirements • Display device (for example, monitor, TV, and so on) equipped with DisplayPort 1.2 • Computer system and video card enabled with DisplayPort 1.2 • Computer system enabled with USB • Standard 104-key wired USB keyboard • Standard wired USB mouse • 3.5 mm mini-jack microphone and/or speakers or headset (optional) Note: This KVM switch supports DisplayPort 1.
KVM switch setup Connect a console to the KVM switch 1. Turn off your computer and any devices or peripherals that are connected to it (for example, printers, external hard drives, and so on). 2. Connect a monitor to the Console DisplayPort port. 3. If necessary, connect a second monitor to the second Console DisplayPort port. 4. Connect a USB mouse to the Console USB mouse port. 5. Connect a USB keyboard to the Console USB keyboard port. 6.
About drivers You don’t need to install any drivers for this KVM switch, as the keyboard and mouse use generic USB drivers that are already installed on any operating system that supports USB technology. Operating the KVM switch About the LED indicators There are three LED indicators located on the front of the KVM switch. For more information about what the LED behavior indicates, see the table below.
Enable or disable hotkey commands By default, hotkey commands are enabled on the KVM switch. • To disable hotkey commands, press and hold the Left Shift key and press Num Lock twice. Release the Left Shift key and then press the Left Ctrl key. • To enable hotkey commands, press and hold the Left Shift key and press Num Lock twice. Release the Left Shift key and then press the Left Ctrl key.
Troubleshooting If you experience issues using this KVM switch and you’re using a PC, you may want to make the following changes to the BIOS settings on your computer: 1. Set HALT ON ERROR to All but keyboard. 2. In PNP AND PCI SETUP, do the following: • Set PNP OS INSTALLED to YES. • Set USB IRQ to ENABLED. I can’t get my wireless mouse and keyboard to work Some wireless mice and keyboards do work with KVM switches, but in general most wireless mice and keyboards don’t support KVM switches.
My keyboard keeps repeating keys when it’s plugged into the switch To resolve this issue, try the following: • If your keyboard is plugged into one of the USB keyboard ports on the KVM switch, unplug it and plug it into one of the USB hub ports. Note: Hotkey commands aren’t available if your keyboard is plugged into a USB hub port.
Technical support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty information This product is backed by a two-year warranty. StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
