User Manual
Table Of Contents
- Warnhinweise
- Introduction
- Asssembly
- Assemble the base
- Adjust the height of the casters
- Attach the column to the base
- Assemble the TV mount
- Attach the support plate to the column
- Move the support plate to the lowest position
- Attach the adapter brackets to a flush mounting surface
- Attach the adapter brackets to a recessed mounting surface
- Attach the TV to the column
- Counterbalance the weight of the TV
- Attach the plastic cover
- Attach the cable clips
- Install the multimedia shelf
- Attach the camera shelf
- Attach the wrench
- Adjusting the STNDMTV70
- Technical support
- Warranty information
Instruction manual
26
the TV.
Attach the TV to the column
Warning! Attaching the TV requires multiple people. Do not attempt to complete this
task by yourself.
Warning! Make sure that you move the support plate to the lowest position on the
column before you attach the TV. For more information, see the “Move the support
plate to the lowest position” section.
1. If you haven’t done so already, press the pedal locks down on each of the casters to
prevent the legs from moving as you attach the TV to the column.
2. With a person holding each side of the TV, carefully lift up the TV and hook the
gure 16
Adapter bracket
Crossbar
Top of TV