User Manual

13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
HDMI Receiver:
1. Connect the IR Receiver to the IR In Port on the HDMI
Receiver.
2. Position the IR Receiver’s Sensor in the location where you
will point the IR Remote Control.
(Optional) Mounting the Extender
Notes: StarTech.com is not responsible for any damages
related to the installation of this product.
Prior to mounting, please test the product’s port
compatibility with all devices intended for use with this
product.
Before mounting the HDMI Transmitter and/or HDMI
Receiver make sure that the surface you are mounting to is
strong enough to support the weight of the HDMI Transmit-
ter and HDMI Receiver. It is recommended that you mount
the HDMI Transmitter and/or HDMI Receiver into a wall
stud to provide the correct support.
1. Measure the distance between the Mounting Screw Holes
on the Mounting Brackets.
2. Using a Level and a Writing Utensil, mark the distance
measured between the two Mounting Screw Holes on the
mounting surface.
3. Using a Phillips Head Screwdriver, screw the two
Mounting Screws into the surface, using the Mounting
Screw Hole locations marked in step 2 as a guide. Make sure
that you leave space between the head of the screw and the
wall.