User Manual

12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Connect an HDMI Cable to the HDMI Out Port on the HDMI
Receiver and the other end to an HDMI Port on the Display
Device (e.g. monitor).
3. Connect a CAT5e/6 Cable to the RJ45 Port on the HDMI
Receiver and the other end to an RJ45 Port on the HDMI
Transmitter.
4. Connect a CAT5e/6 Cable to the RJ45 Port on the
connected HDMI Receiver and the other an to the RJ45
Port on a second HDMI Receiver.
5. Repeat step 4 to connect additional HDMI Receivers.
Powering the Extender
• Connect the Power Adapters to the 12V DC Port on the
HDMI Transmitter and the HDMI Receivers and the other
ends of the Power Adapters to AC Electrical Outlets.
(Optional) Installing the IR
Receiver and Blaster
The IR Receiver and IR Blaster can be connected to allow you
to use an IR Remote.
HDMI Transmitter:
1. Connect the IR Blaster to the IR Out Port on the HDMI
Transmitter.
2. Position the IR Blaster directly in front of the Video Source
Device’s IR Sensor (if you are unsure, check the manual of
the video source device to determine the IR sensor location).