User Manual
9
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
One Transmitter to Multiple
Connections (Network Method)
One to Multiple Connection
In order to use this conīguration, an existing IP network,
Network Switch (sold separately), and multiple HDMI Receivers
(sold separately) are required.
Notes: A minimum of 100Mbps of bandwidth is required per
Receiver (e.g. 100Mbps is needed for one transmitter and
one receiver).
Each Ethernet connection in the setup needs to be at least
100Mbps.
Only one transmitter can be connected to a network at a
time.
A DHCP Server is required to be connected to the network in
order to automatically assign an IP Address to the Extender.