User Manual

10
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
get ipcong • Show IP Address conguration
set ipaddr N1 • Set the static IP Address
• N1 = X.X.X.X [X = 0 ~ 255]
get ipaddr • Show current IP Address
set netmask
N1
• Set the Static Netmask:
• N1 = X.X.X.X [X = 0 ~ 255]
get netmask • Show the current Netmask
set gateway
N1
• Set the Static Gateway Address:
• N1 = X.X.X.X [X = 0 ~ 255]
get gateway • Show the Gateway Address
get in 1 sync
status
• Show the Connection Status of the
HDMI Source Device:
• Available values for N1:
• 0 [No sync]
• 1 [Sync active]