User Manual

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

3. Type Telnet followed by the IP Address of the Splitter

and press Enter. The default IP Address of the Splitter is

192.168.1.50.

4. Enter the commands found in the Serial and Telnet

Commands section.

Serial and Telnet Commands

Command Function

help • Show the full command list

help N1 • Show the help details for command N1

• N1 = {Command name}

get model

name

• Show the Splitter model name

get fw ver • Show the Splitter rmware version

set update

mcu

• Set Splitter Firmware Update

set factory

default

• Factory Reset

set ip mode

• Set IP Address mode

• Available values for N1:

• 0 [Static IP Mode]

• 1 [DHCP Mode]

get ip mode • Show current IP Address assignment

mode