User Manual

6
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Connect a Network Cable to the Network Device and to
the Network Control Port on the Splitter.
5. Connect the Universal Power Adapter to an available
Power Source and to the Power Adapter Port on the
Splitter.
6. Power on the HDMI Display Devices and the HDMI Source
Device.
Operation
VideoWallApp PC Tool
1. Connect the Splitter and the Computer to the same
Network.
2. Launch the VideoWallApp application.
3. Select the Connection tab.
4. If there are multiple Splitters connected to the same
Network: Select the Name of the Splitter and the desired
connection Type, either RS-232 or Telnet.
Select the Layout
In the upper left-hand corner select the layout of the HDMI
Display Devices. This can be done manually by selecting the
number of Columns and Rows. Alternatively, click on the Quick
Selection button to select a preset layout.
Add or Remove Bezels
To add a bezel, select Bezel On/O. Enter the bezel values for
the Horizontal and Vertical bezels. Select Set to apply these
settings.