User Manual

8
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
8. Slide the Drive Tray back into the Hard Drive Enclosure so
that the USB 3.1 Micro-B Connector is facing outward.
9. Place the Faceplate over the Connector.
10. Secure the Faceplate in place by inserting two Drive Tray
Screws on either side of the USB 3.1 Micro-B Port on the
front of the Hard Drive Enclosure and use the Screwdriver
to tighten the Drive Tray Screws.
Connecting the Hard Drive Enclosure
Note: The Hard Drive Enclosure does not require an exter-
nal power supply, as it receives enough power through the
USB port on the Host Computer.
After you have installed a Hard Drive in the Hard Drive
Enclosure:
• Connect the USB C to Micro B Cable (included) to the USB
3.1 Micro-B Port on the Hard Drive Enclosure and to a USB
3.1 port on the Host Computer. The Host Computer’s OS
will automatically install the necessary drives.
Note: Before you use the Hard Drive, you need to format it
according to the requirements of your OS. For more informa-
tion about how to do so, see the Formatting a Hard Drive
section.