Manualshelf

User Manual

ManualsBrandsStartech ManualsHardwareStarTech.com Secure Tablet Stand, Anti Theft Universal Tablet Holder for Tablets up to 10.5", Lockable Tablet Stand for Desk/ K-Slot Compatible, VESA Mount, Wall Mount Tablet Enclosure Security POS Tablet Stand - stand - for tablet - black
11121314151617181920
12
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Thread the Small Washers (x 3) over the 5 x 20 mm Self
Tapping Screws (x 3) to complete the Screw Assemblies.
5. Align the Angled Bracket with Pilot Holes, located in the
Wall.
6. Insert the Screw Assemblies (x 3) through the Angled
Bracket and into the Wall and tighten, using a Phillips
Head Screwdriver. (Figure 10)
Attach the Tablet Enclosure Assembly to the Angled
Bracket
1. Align the holes, located on the Rear Plate of the Tablet
Enclosure Assembly, with the holes, located in the Angled
Bracket.
2. Insert the M4 x 8 mm Screws (x 4) through the Angled
Bracket and into the rear of the Tablet Enclosure Assembly
and tighten, using the M2.5 Hex Key.
3. Attach the Power/Data Cable to an available Power Source.